Product Description
RAB Lighting STL360H Flood Sensor Kit
- UL Listing: Suitable for wet locations.
- Voltage: 120 volts AC 60 Hz.
- Power Consumption: 1W
- Surge Protection: Withstands up to 6000 volts.
- Wall Switch Manual Override: Two flip logic prevents activation by momentary power outages. Override resets to auto at dawn. No extra wiring needed.
- RF Immunity: Circuits fully shielded for maximum radio frequency immunity.
- Switching Capacity: 8 amps, 1000 watts incandescent @ 120 volts.
- Time Adjustment: 5 seconds to 12 minutes.
- Wide Sensitivity Control: Adjustable from 100% to 30%.
- Evening Timer: Keeps lights on for 1-8 hours after dusk. Then sensor is motion activated until dawn.
- Set it and forget it: STL360's full coverage pattern reduces need for aiming and adjustment.
- Advanced Detection Logic: Minimizes false triggers.
- Photoelectric Control: Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications.
- Detection: Senses 180° and 360° down for Total Detection.
- Scanning LEDs: 3 LEDs continually scan back-and-forth.
- Color Matched Lens: Dark lens with bronze units, white lens with white units.
- Temperature Compensation: Sensitivity adjusted automatically for consistent detection in hot and cold ambient temperatures.
- Mounting: CU4 plate allows the sensor to be mounted under a soffit.
- Lens Masks: Customized press apply lens mask included to reduce coverage easily.
- Warranty: 10 year sensor warranty.
Click Here for Specification Sheet
Click Here for Installation Instructions